LED light with a good light effect how to break?

LED strips are a great artifact of indirect lighting and are common in hotels, high-end shopping malls and home lighting applications. Seeing the light without seeing the light is our most understanding of the LED light strip. Since the light strip is mounted in a hidden manner, the light source is not exposed, which can effectively reduce the discomfort that the glare brings to the human eye. Therefore, LED light strips are widely used in various commercial spaces and home lighting, and are mainly used for indirect lighting of light troughs, large-area luminous ceilings or luminous walls, and lighting of showcases or walls.

LED lights are good, but there are always times when the light output is not satisfactory. Solve the problem of poor light output, grab from the source, that is, choose the light belt when you choose, below Xiaoxi share a few simple lighting with a small cheat, let you immediately become a lighting expert!

▶The light should be evenly distributed.

There are two meanings of uniform illumination:

1) The brightness between the lamp bead and the lamp bead should be the same, which is related to the quality of the LED lamp bead .

Quick judgment method: use the eyes! Use your eyes to see if the lamp strip is shining evenly.

2) The brightness of the first and last tails of the lamp should be the same, which is related to the voltage drop of the LED strip.

The LED strip needs to be powered by a power source. When the voltage drop of the LED driver is relatively large, the brightness of the LEDs connected to the long LED will be inconsistent.

Quick judgment method: connect the required length, illuminate the lamp strip, and discharge them together for comparison, and observe with eyes.

▶Light color should be consistent◀

Light color consistency is also a parameter to test whether a LED lamp with a lamp bead quality is qualified.

Judgment method: Look directly at the light strip, or find a piece of white paper, vertically close to the LED light-emitting surface, you can basically judge whether the light color of this light is consistent. Looking at it with the eyes is the most intuitive.

▶Color temperature should be selected

General lamp strip products are available in 3000K and 4000K color temperatures. Sidon LED strip products are available in 4 color temperatures, 2400K, 2700K, 4000K and 6400K. Hotels, high-end shopping malls and homes, you can choose a low color temperature below 3000K to create a warm atmosphere; the office can choose a cold light source with a higher color temperature.

▶Good color rendering◀

The color rendering of LED strips is high, especially when applied to large-area luminous ceilings, as basic lighting or in display cabinets as display lighting, the color rendering index Ra>80 is a professional LED strip must meet Requirements. This is also the requirement of the national standard GB50034-2013.

The tips of the above selected light strips allow us to select more satisfactory products when purchasing the light strips. But the lamp is selected correctly, and the installation must be installed correctly. Here, I also provide a few solutions for the installation of light strips.

▶The light effect is not neat

If the light effect is not neat, a mounting slot can be used. Since the paint on the wall itself cannot be ideally flat during the decoration, it is easy to have irregular lighting. Use the installation box to effectively solve this problem.

▶It’s not coming out

The angle of illumination of the LED strip is usually only 120°, and some of the slots are too high, we can not see the light produced by the LED strip. In this regard, the LED lamp can be padded so that the distance between the lamp strip and the upper edge of the lamp slot is preferably about 4-5 cm; or the lamp strip is attached to the side wall.

▶When the lamp is connected too long, the brightness of the tail of the lamp is not enough.

1) Use a higher power constant voltage driver. Do not use 3A appliances to drive 3528 soft lights with 6 meters, but in order to prevent the brightness of the tail of the lamp strip is not enough, you can use 4A appliances to ensure that the appliance has enough margin. However, the power of the appliance does not have to be much higher, otherwise it will cause waste.

2) Change the connection method of the lamp strip. 6 meters of 3528, can be connected in parallel with 5 meters + 1 meters of light, or a combination of 3 meters + 3 meters.

LED strips are divided into soft and hard types, and the types and installation methods of the strips used indoors and outdoors are also different. It should be carried out according to the actual use during purchase and installation to ensure good light output and long service life.

WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349