WOSEN LIGHTING TECHNOLOGY LIMITED

WOSEN LIGHTING TECHNOLOGY LIMITED

الصفحة الرئيسية> مدونة> Led light belt does not shine how to repair _led lights with maintenance methods

Led light belt does not shine how to repair _led lights with maintenance methods

February 27, 2023

LED light strips have gradually emerged in the decoration industry because of their light weight, energy saving, softness, long life and safety. So what should I do if the LED light does not shine? The following is a brief introduction to the maintenance method of the LED light strip.

Led light belt does not shine how to repair _led lights with maintenance methods

LED fault analysis and maintenance

1, high temperature damage

The high temperature resistance of the LED is not good. Therefore, if the soldering temperature and soldering time of the LED are not well controlled during the production and maintenance process, the LED chip will be damaged due to the ultra-high temperature or the continuous high temperature, resulting in the LED strip. The phenomenon of suspended animation.

Solution: Do the temperature control of reflow soldering and soldering iron, implement special person responsible, special file management; soldering iron adopts temperature-controlled soldering iron to effectively prevent the soldering iron from burning the LED chip at high temperature, it should be noted that the soldering iron can not stay on the LED pin for 10 seconds. Otherwise it is extremely easy to burn out the LED chip.

Led light belt does not shine how to repair _led lights with maintenance methods

2, static burnout

Because the LED is an electrostatic sensitive component, if the electrostatic protection work is not done well during the production process, the LED chip will be burned out due to static electricity, resulting in a suspended animation of the LED light strip.

Solution: Strengthen the static electricity protection, especially the soldering iron must use anti-static soldering iron. All employees who come into contact with LEDs must wear anti-static gloves and electrostatic rings in accordance with regulations. Tools and instruments must be grounded.

Led light belt does not shine how to repair _led lights with maintenance methods
Anti-static packaging

3. Moisture bursts at high temperatures

If the LED package is exposed to the air for a long time, it will absorb moisture. If it is not dehumidified before use, the moisture in the LED package will be thermally expanded due to excessive temperature and long time period during reflow soldering. The LED package bursts, which indirectly causes the LED chip to overheat and be damaged.

Solution: The storage environment of the LED should be constant temperature and humidity. The unused LED must be placed in an oven of about 80° for 6~8 hours before dehumidification to ensure dehumidification. Moisture absorption.

Led light belt does not shine how to repair _led lights with maintenance methods

4, short circuit

Many LED lights have poor illumination because the LED pins have a short circuit. Even if the LED lights are replaced, they will be short-circuited again when the power is turned on again, and the LED chips will be burned out.

Solution: In time to find out the real cause of damage before maintenance, do not rush to replace the LED, found that the cause of the short circuit after repair or directly replace the entire LED strip.

Led light belt does not shine how to repair _led lights with maintenance methods
LED light strip short circuit

to sum up

It is still more troublesome to repair the LED light strip. If it is only used in a small range, it is better to replace a light strip directly. The price of the LED light on the market is only about 20~30 yuan/meter. I hope this article can help everyone.

اتصل بنا

Author:

Ms. Mandy

بريد إلكتروني:

mandy@wosenled.com

Phone/WhatsApp:

+8613425434349

المنتجات الشعبية
You may also like
Related Categories

البريد الإلكتروني لهذا المورد

الموضوع:
الالكتروني:
رسالة:

Your message must be betwwen 20-8000 characters

  • ارسل السؤال
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

إرسال